Medite® MDF - FSC Certified

We stock the Medite brand, a prestige board generally acknowledged as the market leader in finish and quality. It cuts extremely cleanly and holds a sharp profile when moulded. When painted or lacquered the finish is probably the finest achievable with any timber based material. There is also the added advantage that the edges can be painted without lipping. The exceptional smoothness, flatness and stability of MDF make it an ideal board for veneering. MDF can be supplied in flexible, moisture resistant and fully waterproof versions.

Stock Sheet size  2440 x 1220 mm


Medite Premier:  2, 3, 4, 6, 9, 12, 15, 18, 22, 25 mm

Medite Moisture Resistant:  6, 9, 12, 15, 18, 22, 25 mm

Some larger sheets are kept in stock and others with thicknesses up to 50 mm can be obtained on request.

Sundeala Pinboard

Sundeala brand Medium Pinboard, stocked in 9 mm interior quality (but available in other thicknesses and for exterior use) is the best material for permanent pinboard construction.

Sundeala Pinboard
Birch Plywood

BB/BB Grade


A premium quality hardwood ply that is both attractive and practical for its strength and durability. Birch ply is recommended where a good strength/weight ratio and a smooth hard surface is required.


Stock Sheet Size  1220 x 2440 mm

Interior:  0.8 and 3 mm

Exterior:  1.5, 4, 6.5, 9, 12, 15, 18, 24, 30 mm

Oversized sheets can be ordered on request

Birch Plywood
Flexible Plywood

Available Short-grain or Long-grain, this is an excellent material for cladding round corners and other curved surfaces.


Stock Size  8mm x 1220 x 2440  Flexible Plywood Cross Grain

Long Grain can be ordered on request

Flexible Plywood
Marine Plywood

Plywood that has been specially developed for use in high moisture environments. This is a material that is used in boat construction and is therefore designed to survive longer when continually exposed to the elements.


Available to order.

Utility Plywood

Utility Plywood is used for a wide range of general purpose applications where quality of surface finish and clean cutting are not of paramount importance. The plywood is manufactured to WBP exterior specification.


Sheet size 2440 x 1220 mm in thicknesses 4 mm to 25 mm.


Larger sheets 3050 x 1525 mm are available on request.

Decoflex Paper Backed Veneer by Decospan®

What is Decoflex Wood Veneer?

Decoflex is a jointed sheet of veneer that is extremely easy to work with. The jointed veneer sheet is first pressed onto paper and then the fibres within the wood are broken to allow flexibility. It is then pre-sanded to 150 grit.


Key benefits


  • Flexibility and easy to work with

  • Can be glued onto any substrate in next to no time

  • Can be used as a quick way of finishing the edges of any other type of panel material. 

  • Decoflex is produced with a formaldehyde-free adhesive.


Stock species include:


Ash, Beech, Steamed Beech, Rotary Cut Birch, Cherry, Lime, Maple, Oak, Steamed Pear, Sapele, Sycamore, Teak, Walnut, Wenge & Zebrano.


Sheet Size 2500 x 1240 mm. Thickness 0.4 to 0.6 mm.


1 - Top layer wood veneer choosen

2 - Paper bottom layer in the same colour as the chosen wood

Veneered MDF

Many of the timbers that we keep are available in veneer form and bonded to a variety of boards but principally on plywood of 4 mm to 12 mm thickness veneered one side and on MDF of 4 mm to 26 mm thickness mostly veneered both sides. These boards are ideal for cabinets, shelving, table tops and any application requiring components of a greater width than normally available in solid wood planks. Sheet sizes are generally 2440 x 1220 mm but some thicker boards are available 3050 x 1220 mm. Matching veneer strips are available with a hot melt adhesive for ironing on to exposed edges and our mill will also produce square and profiled lippings in the appropriate timber to match.

Veneered MDF